The Thermco Bell Jar Cleaner is specially designed to accommodate large bell jars used on CSD Epitaxy products with etch basin to clean auxiliary chamber parts making efficient use of etch chemicals. It is simple to use with its ergonomic design and user-friendly touch screen interface.
The quartz components of the EpiPro are loaded and unloaded via double doors at the front of the cleaning chamber. The bell jar is manually placed inside the chamber using a lifting trolley. The smaller profile quartz components are loaded into the weir bath beneath the Bell Jar shelf.
The Bell Jar Cleaner is easily maintained from the front and side, with options available for door placement at the rear if preferred.
Chemicals can be manually filled and blended by the user, alternatively an optional Chemical Dispense Unit (CDU) may be selected. The optional CDU provides accurate and safe chemical delivery to the system. If this option is selected, the Bell Jar Cleaner will be ‘chem-ready’.
The system design is based on standard process chemical blending, typically:
- Mixture of DI Water 35% and HNO3 (Nitric acid) 65%
- Mixture of DI Water 50% and HF (Hydrofluoric acid) 50%
Customer specific chemistry requirements to be confirmed prior to ordering the system.