Weebit Nano nears productisation, negotiating initial customer agreements

Weebit Nano (ASX: WBT, Weebit or Company) is pleased to provide this activity report for the quarter ended 31 December 2022 (Q2 FY23), along with the Company’s Appendix 4C cash flow report.

Commenting on Q2 FY23, Weebit CEO Coby Hanoch said: “Weebit Nano achieved key milestones in its commercialisation roadmap during the period, receiving the first silicon wafers with its embedded ReRAM from a commercial fab, commencing qualification at SkyWater, taping-out its first 22nm demo chip, ramping up discussions and evaluations with Tier-1 foundries and potential customers, and progressing longer-term development activities for the discrete memory market. Our progress in the first half of the financial year means we are well-placed to productise our embedded ReRAM technology and secure first revenues in 2023.

“Technology qualification is now underway with SkyWater – the final step before productisation and first orders on SkyWater’s 130nm process. Our first taped-out silicon wafers from SkyWater’s U.S. fab have validated the manufacturing process, enabling potential customers to confidently start incorporating our ReRAM within their system-on-chips (SoCs). While qualification data from demo chips produced at Leti is highly valuable, technology qualification is required for every new foundry to confirm the technology meets production-level parameters at the specific facility.

“The tape-out of our first 22nm demo chip is a significant step forward for Weebit, enabling us to address a fast-growing segment of the market where the incumbent technology is not viable. While 22nm is one of the industry’s most common process node, only a few foundries globally can manufacture at this advanced geometry. Our ability to deliver exceptional performance for connected and ultra-low power applications at 22nm FD-SOI further strengthens our engagement with the world’s most sophisticated fabs.

“Our embedded ReRAM is nearing commercialisation at a pivotal juncture for the industry. Demand for ReRAM is growing rapidly with many Tier-1 foundries now looking to add ReRAM as an alternative NVM to cater to customer requests. The use of ReRAM from the foundry in major consumer products has been instrumental in changing industry perception of ReRAM as a future technology to one that is available right now. This change, combined with our qualification at Leti and the wafers from SkyWater, has seen our engagement with multiple fabs increase, and we are in different phases of technical evaluation with several of them.

“During the period we also strengthened our leadership team with Ed McKernan joining as Director of North America Sales, driving our sales activities in North America in general and with SkyWater customers specifically. We also brought on Gideon Intrater as a consulting Business Strategy Advisor, helping us examine potential areas of growth and strategic expansion.”

First SkyWater wafers with Weebit ReRAM

Weebit achieved a major commercialisation milestone in Q2 FY23, receiving from SkyWater Technology the first silicon wafers integrating its embedded ReRAM module. These first wafers from a commercial fab confirm the ease of manufacturing of Weebit ReRAM with standard tools, enhancing customer confidence in the technology.

The wafers have been sliced into chips, packaged, and tested, and are fully functional. Weebit has started the qualification process for these wafers. Designed in SkyWater’s 130nm CMOS process, Weebit will use these chips to demonstrate its technology, and potential customers can use them for testing and prototyping.

Qualification is expected to be completed in the first half of CY23, enabling mass production on SkyWater’s 130nm CMOS process.

Taped-out first 22nm demo chip

On 2nd January, Weebit taped-out its first demo chips integrating its embedded ReRAM module in an advanced 22nm fully depleted silicon on insulator (FD-SOI) process. 22nm is one of the industry’s most common process nodes.

Weebit and its development partners CEA-Leti and CEA-List designed a full IP memory module integrating a multi-megabit ReRAM block targeting the 22nm FD-SOI process, delivering a low-power, cost-effective embedded non-volatile memory (NVM) able to withstand harsh environmental conditions.

New NVM technologies, such as Weebit ReRAM, are required to address these smaller process geometries for IoT, 5G, edge AI and automotive as embedded flash is not viable below 28nm.

Qualified first ReRAM module

During the quarter, Weebit successfully qualified its embedded ReRAM memory module produced at Leti, demonstrating compliance with JEDEC microelectronics standards at industrial temperatures for endurance, retention, and SMT reflow. Technology qualification at Leti’s state-of-the-art facility shows the repeatability and maturity of Weebit’s ReRAM technology, with this data resulting in new discussions and technical evaluations with several Tier-1 fabs and potential customers.

Weebit and Leti have commenced the qualification process at higher temperatures and endurance levels, which are required for some advanced applications.

Development of ReRAM selector progress

Weebit and Leti progressed the development of a ReRAM selector during the quarter, a key step towards high-capacity memory arrays required for discrete memory chips using fab-friendly materials and standard tools. This innovation means the Weebit ReRAM selector can be easily integrated into any CMOS fab, reducing manufacturing complexity and costs.

A selector is a key component which enables implementation of large memory arrays in much smaller chip areas. While the initial focus of Weebit’s ReRAM selector was for discrete chips, the recent progress makes it also suitable for future embedded applications, such as edge AI and automotive.

Evaluations with Tier-1 fabs and customers

Discussions and technical evaluations with several Tier-1 fabs and key customers are progressing well. While these evaluations are in different stages and some fabs require significant technical study and validation, they have the potential to lead to new licensing agreements and orders.

Strengthening the team, focus on US sales

During the quarter, Weebit enhanced its management team with two key appointments. Mr Ed McKernan was appointed Director of North America Sales and Mr Gideon Intrater joined as Business Strategy Advisor. Mr McKernan has broad sales experience across ReRAM and NVM technologies, including 11 years in Sales Director roles at ReRAM technology developer Adesto. Mr McKernan will drive Weebit’s sales in North America, initially focused on SkyWater customers.

Mr Intrater brings vast experience in the semiconductor space to Weebit, previously holding executive roles in multiple companies including CTO at Adesto, Chair of the JEDEC JC-42.4 Non-Volatile Memory Committee, and EVP Marketing at MIPS, an embedded processor company. Mr Intrater will work with Weebit’s executive team to explore potential growth opportunities.

ReRAM environmental impact analysis

In January, Weebit and CEA-Leti completed a lifecycle analysis of Weebit ReRAM compared to another emerging non-volatile memory technology with ReRAM shown to have a significantly lower environmental impact. The analysis estimated the contribution of ReRAM and Magnetoresistive Random Access Memory (MRAM) to climate change based on their production flows, including raw materials and manufacturing processes. The study found ReRAM was more eco-friendly than MRAM on all measured parameters, including:

  • 30% reduction in GHG emissions
  • 41% reduction in water use
  • 53% reduction in use of minerals and metals

More information is available here

Market engagement ramping-up

Weebit is ramping-up engagement with potential customers and partners as it nears productisation, participating in several industry conferences during the quarter. These included Design & Reuse’s IP-SoC Conference in Grenoble and an invited talk at Stanford University’s Non-Volatile Memory Technology Symposium (NVMTS).

In November, Chair Dadi Perlmutter and CEO Coby Hanoch met with shareholders in Sydney, Melbourne and Perth and presented at three local investor conferences.

Upcoming events and conferences include:

  • 14-16 March 2023: Embedded World 2023, Germany
  • April 2023: IP-SoC Silicon Valley 2023, California

For more info visit


Notable operating cash flow items during the quarter included R&D expenses of $2.5 million. Total R&D payments for the quarter were $680,000. Payments to related parties over Q2 FY23 were $199,000, inclusive of fees paid to Directors and the CEO’s cost of payroll. At the end of the quarter, Weebit had a strong cash balance of $45.6 million.

Looking forward

Weebit Nano is on track to achieve the following milestones over the coming quarters:

  • Complete technology qualification with SkyWater;
  • Sign new agreements with partners and customers;
  • Sign up a Tier-1 fab; and
  • Commence scaling embedded ReRAM technology below 22nm.

Investor briefing details

CEO Coby Hanoch will participate in a “Meet the CEO” interview following the Company’s H1 FY23 results. More details on this event will be lodged on the ASX in the coming weeks.