Time-saving and more centering options: Updates for TRIOPTICS alignment turning stations

For high-precision lenses, the method of mounting single lenses in sub-cells and processing them using
alignment turning has proven effective. During this process, the edge of the mount and the flange
surfaces of mounted lenses are produced in a way so that the axis of symmetry of the mount coincides
with the optical axis of the lens and ensuring that all lenses have the correct air gaps between them. After
being machined, the mounted lenses are inserted into a lens barrel – without requiring any additional
alignment steps. In many cases, clamping rings are used at both ends of the barrel to secure the elements
within the lens barrel. If the inside of the lens needs to be sealed, for example because it is filled with gas,
additional O-rings are used.
The TRIOPTICS ATS 100, 200, 200 UP, and 300 UP alignment turning stations now enable advanced
processing of the lens edge with threads and grooves. The thread or groove is cut directly on the lens
mount, thus saving time by integrating this into a single work process along with the other steps of the
mount edge machining. The scope of functions on these alignment turning machines can be expanded at
any time: the upgrade includes a software enhancement and the required tools.

In addition to saving time, the combination of thread or groove cutting with an alignment turning machine
offers further advantages due to the alignment of the chuck with the optical axis of the lens. The threads
and grooves are centered to the optical axis of the lens, while the standardized flank angles of the threads
and grooves are achieved in a uniformly and reproducible way as a result of the simple tool movement in
only one direction.
Applying a thread to the lens mount enables a fixed positioning of this element itself, which eliminates the
need for clamping rings or allows individual, critical elements to be easily fixed within the assembly. This
offers particular benefits if the overall size of the lens has to be reduced. Grooves allow secure
positioning of the O-rings and thus ensure optimal sealing of the lens against leakage of the filling gas.